Just another WordPress site

DIY: How to Make Fake Rocks for Landscaping?

DIY faux landscape rocks or how to make fake rocks for landscaping?

If you decided to diversify the design of your garden, to build an artificial waterfall or any other aesthetic design, it is not necessary to use natural stones and you don’t need to think where to get a wonderful erratic boulders.

You can create fake rocks with your hands, that will be more economical. Fake rocks is a great imitation of natural stone and just the option that will help you to decorate the garden is very natural.

From the article below you will know how to build artificial landscape stones and how to take care of them? In addition, we will give some useful recommendations and advices.



Creating fake landscape rockAfter making fake rocks for landscaping with your hands, your guests will not distinguish it from natural stone. To create it it’s necessary to use special technologies, which include simulation of the natural environment special dyes and pigments. It should be noted that the creation of fake rocks with your own hands will justify all your efforts.

Artificial rocks has many benefits such as:

  • durability;
  • light weight;
  • environmental safety;
  • weather resistance;
  • high similarity with the natural material;
  • variety of colors and textures.

Is it possible to make?

Buying decorative materials for your garden is very simple, but it’s quite costly. So why not try to make beautiful rocks for a cottage, garden, backyard on your own?

It’s not as difficult as it seems. Of course, it will be easier if you already have some skills. But following this step by step instructions you can make beautiful fake rocks even if it is your first time.

Necessary tools

Flowers inside the fake landscape rockFirst of all in order to answer the question: “How to make landscape rocks?”, you need to know that it is not a very difficult task. For the manufacture of fake rocks you do not need any expensive tools.


  • mesh netting;
  • pieces of foam;
  • plastic bags;
  • thin wire or wide tape;
  • tin snips (wire cutters);
  • sand;
  • Portland cement;
  • spatula;
  • pigments.

Choosing proper material

As a rule, for the manufacture of fake rocks people use cement. It is relatively expensive and available material.

In addition, the stones made of it are resistant to frost, which is a very important feature. Other materials are commonly unsuitable for home production, or are not suitable for decorating the outside area.

For example, gypsum or acrylic. Therefore, fake rock made of portland cement – the best option. It’s inexpensive, beautiful and of high quality.

Now, when all materials and equipment is ready, let’s move to the main question: “How to make fake rocks for landscaping?”.

DIY faux landscape rocks

So, regarding the choice of location of the future stone, it completely depends on your taste. Fake rocks can be used for decorating garden paths, waterfalls, flower beds and so on.

Next, you need to decide the future shape of the stone and its texture, make a sketch on paper or to take a sample of a real instance. Going to the store, you need to have a clear idea of what pigments you may need.
The form of future rock from the paper
If you find it difficult to determine at a glance the colors of the stone, then ask the seller to help you to choose pigments, for example granite or marble.

Once all the materials are purchased, you can begin to work.

  1. Make mesh netting shape of the future rock. You’d better have small grid with cells of 1-2 cm, Fill the resulting shape with pieces of foam of 2-3 cm, lay the emptiness with thin plastic bags. The bottom of the stone you should tighten using a thin wire or seal wide stationery tape.
    Netting shape of the future rock
  2. Mix Portland cement with sand in proportion 1 to 3. Mix dry mixture with water, leave for 5-10 minutes, then mix again. You should get a mixture resembling the consistency of thick dough (it should not flow quickly).

    Mix sand with cement

  3. Apply the mixture on the stone surface with a spatula (layer about 1.5-2 cm). Wet product from the spray, cover with plastic wrap, leave for a day.
    Applying the misture on the rock's surface
    Then take 10 g pigment base color of the stone, add 250 g of Portland cement, dilute the mass with water to the consistency of thick cream.

    Attention: capture the moment when the mixture starts to set but is not harden completely.

    Wear rubber gloves, brush the product the resulting solution. It is important to catch the moment when the mixture starts to set but not harden completely. Take the spatula; give the product a natural shape: make notches, scratches, chips.

  4. Then using a brush with stiff bristles make pinholes in several places. Again moisten the stone with a spray bottle, cover it with foil, leave until it’s completely dry.
    Making pinholes with brush
    Then flip the unit and apply the bottom of the cement mortar. After everything dries, you can begin to paint the stone. Dissolve the pigments according to the enclosed instructions.

    Be careful: The main task – to render the product and to make it look as natural as possible.

    The paint is applied using toothbrush method spraying to give streaks use crumpled plastic bag or sponge. you can take the spray paint instead of pigments, if applied each color in thin layer, then you’ll have a interesting grainy texture. The result is better to fix with varnish spray.

    Recommendation: don’t repeat the location and shape of the previous rocks.

Video tutorial

In case you did not understand the instruction, you can watch the following video, which shows another easy technique of how to make fake landscape rocks:

How to take care of rocks?

In this section, we will discuss how to make landscape rocks shiny? Such rocks don’t require any special care. As it has been said, they are quite resistant to frost, moisture. Find out effective ways of killing unnecessary grass.

Advice: The one thing you may do after the rock is dry, you may cover it with a layer of sealant for additional protection from the weather.

Learn how to clean rocks properly?


From the mentioned above it can be concluded that fake rocks is quite popular material that is often used when decorating and creating a landscape design in the garden. It is an indispensable material for landscape designers who use it to cover unsightly places in the garden or for those who want to give a garden a new uncommon look.

No comments

Thank you! Your comments will appear after review.
Add cooments